banner



How To Fold A Paper Into 6 Squares

Download Article

Download Article

Folding a piece of paper in half? Piece of cake. Folding information technology into quarters? Barely an effect. Dividing a piece of paper into perfect, well-baked thirds? This can really be a bit of a challenge as anyone who has ever folded an of import piece of correspondence can tell you, there is a surprising amount of effeminateness needed for this chore. Whether you're sending a letter of the alphabet to a loved i, doing a math project, or just dividing your scratch paper into three equal spaces, a perfectly-folded piece of paper shows professionalism and attention to particular.

  1. one

    First with your paper apartment on your work area. Believe it or not, at that place are many ways to fold a paper into thirds, but some give more precise results than others. Attempt this method if you don't need to be exact — it'south quick and information technology works well, but rarely will your results exist perfect.

    • On the plus side, yous won't need whatever tools for this method.
    • Note that a standard 8 1/2 × 11 inch (27.9 cm) canvas of paper doesn't have to exist folded perfectly into thirds to fit in an envelope, making this a good choice for correspondence.
  2. ii

    Roll the paper into a loose cylinder. Your goal is to make a fat, loose roll from your paper — almost the dimensions of a rolled-up newspaper. Don't make any folds yet.

    Advertisement

  3. 3

    Align the edges, then gently flatten the heart. Expect at your cylinder from the side — yous desire one edge of the rolled-up paper to be on the left and the other to exist directly across from it on the correct. Get-go to compress the cylinder, adjusting equally yous go to proceed the edges lined upwardly.

    • You lot desire the 3 layers of paper created this way to be approximately the same size. For this, you'll desire one edge of the paper snug confronting the inside of the fold of the cylinder and the other edge lying over the tiptop, lined upward with the other fold. This is more intuitive than it sounds.
  4. iv

    Flatten the cylinder completely when you have a most-fit. When you see that your newspaper is as near to perfect thirds as yous can realistically get it, press downward on the edges of the newspaper to get smooth, make clean creases. Congratulations! Your newspaper should exist in (near) perfect thirds.

    • At this point, you tin can make final-minute adjustments, but avert making more than than 1 crease unless your thirds are very uneven — this tin can look unprofessional.
  5. Advertisement

  1. 1

    Fold a "scratch" piece of paper into rough thirds. This method sacrifices i piece of paper to assist yous get some other piece just right. Yous'll need ii pieces of paper for this method — one that you want to fold well and one that you don't mind ruining. Your two pieces of paper should be the same size.

    • Become your "scratch" paper into rough thirds any way y'all wish — you lot may desire to use the "intuitive" method above or ane of the others in this article. You tin even employ trial-and-fault to get your folds right.
  2. 2

    Refold until the thirds are as precise as possible. Now, make adjustments to your scratch paper until you lot have it folded into near-perfect thirds.

    • Do not worry about how many times this takes or how many unsightly creases you make — this paper doesn't "count."
  3. three

    Use your scratch paper as a folding guide for the "skilful" paper. In one case you lot are satisfied with the folds in your scratch paper, take the now-folded blank sheet and line it up with the edge of the paper you want to fold well. Use the scratch paper as a blueprint for the folds you lot make in your "good" sail of newspaper.

    • You lot can practise this by marking the positions of the folds on the "good" newspaper or using your eyes to visually compare the two sheets.
  4. four

    If desired, use a straight border to assist. If yous want, you tin take a directly edge (even something as uncomplicated as your envelope) and lay it over the two sheets to help you mark the folds from your scratch newspaper on your "good" paper. If y'all're using a sturdy direct edge, y'all can even fold your "adept" paper over information technology for precision.

    • When you lot're washed, save your "scratch" paper for annotation-taking or recycle information technology. Don't transport perfectly good paper to a landfill.
  5. Advertisement

  1. ane

    Fold i edge of the paper over the height of the canvass. This method of folding perfect thirds uses naught more than the measuring power of the homo eye to find the spots where your paper folds into thirds. Despite this, it's surprisingly effective. In fact, in one case you've proficient it a few times, you tin can probably get away with using information technology for important correspondence.

    • To begin, you desire to take one border of the paper and double it up, bringing it across the height of the rest of the page. Don't brand any creases yet — the edge y'all are about to fold should be gently rounded.
  2. 2

    Line the edge up so that it covers half of the space. Try to line upwards the edge of the newspaper that y'all're holding and so that it covers half of the newspaper that remains. The human eye is much better at judging halves than thirds, so information technology will be much easier to line upwards the newspaper correctly hither than information technology would have been if you lot had attempted fold the newspaper into thirds from the beginning.

    • When you have the border of the folio lined up just right, crease the paper, making sure not to let the gratis edge move as you're making your crease.
  3. 3

    Tuck the remaining edge into the crease and fold in one-half. The hard office of this method is already done. Now, all that you lot need to do is brand the final 1-third fold. Do this by taking the other edge of the paper and tucking information technology under the elevation edge so that it is snug against the inside of the crease. Make a second crease.

    • If y'all've fabricated accurate folds, all of the edges of your paper should line upwards at this point. If they don't, feel free to make minor adjustments as needed.
  4. Advertisement

  1. i

    Fold the paper in half. This method uses techniques derived from origami, the Japanese art of newspaper-folding, to become perfect third folds.[1] Though origami is usually done with foursquare sheets of paper, this method should likewise work with standard 8 1/2 × 11 inch (27.9 cm) paper like you lot'd discover in an office. Kickoff by folding your paper in half in the same direction y'all'd like to fold it into thirds.

    • Annotation: If you don't want to make actress folds in your newspaper, y'all can find the midpoint of the paper and advisedly marker a line across to carve up the paper in one-half. If you do this, however, your line will demand to be extremely directly to match the accuracy of a elementary half-fold.
  2. two

    Draw a line from the bottom left to the right side of the one-half-fold. Position your paper and then that the one-half fold you just made goes from left to correct. Use a straight edge to carefully draw a line from the bottom left to the point where the fold in the middle meets the correct edge of the newspaper.

    • You can likewise practice this method with a line that extends from the bottom correct corner if you reverse all of the directions afterward this, but for convenience's sake nosotros've decided to but give a single ready of directions.
  3. three

    Draw a line from the top left to the bottom right. Utilise your straight edge to carefully draw a line from the very summit left corner of the newspaper to the bottom right. This line should intersect your middle fold at its middle and your first line somewhere on the correct side of the page.

  4. iv

    Make 1 fold at the intersection of your two lines. The spot where your two lines intersect marks i of the 3rd folds you demand to make. Use a straight edge to draw a line that passes through this point and also intersects both edges of the paper at 90 degree angles.

    • Carefully fold and crease along this border. The folded edge should carve up the rest of the paper into halves — if it doesn't, you may need to brand minor adjustments at this point then that it does.
  5. 5

    Make the 2d fold past tucking the other side of the paper in. Finally, have the not-folded border of the newspaper and tuck it underneath the folded edge. Make a second crease when it is snug confronting the inside of your starting time crease. Your paper should at present be divided into thirds.

  6. Advertisement

  1. ane

    Measure the length of one side. Take the methods above left you unsatisfied by the preciseness of your folds? Attempt following the steps in this department, which should give you folds that are equally close to exact equally you can reasonably hope to be. You'll demand a measuring tool (like a ruler) and a reckoner or some scratch newspaper for this method. Showtime past measuring the length of the side you want to make folds in.

  2. 2

    Split this length by 3. Doing this volition give you the width of each of your thirds.

    • For instance, if you're using a standard 8 one/2 × 11 inch (27.nine cm) slice of paper and yous desire to split up information technology into thirds along the xi inch (27.9 cm) side, but divide 11 by 3. eleven/3 = 3 2/iii or 3.667. This ways the folds should be 3 two/3 inches apart.
  3. iii

    Mark this distance, measuring from the edge of the paper. Using your measuring tool, mark the spot that is the distance y'all determined above from the border of the paper. Once again, you should be measuring forth the side of the newspaper that you plan to fold.

    • In our example in a higher place with the 8 ane/2 × 11 inch (27.nine cm) paper, we would measure iii 2iii inches (9.3 cm) along the 11 inch (27.9 cm) side and marker this altitude.
  4. 4

    Brand a crease at this point, then fold the remaining flap of paper over. Make a fold through your marker that is perpendicular to both edges of the paper. This is one of your third folds. The 2d is piece of cake — just tuck the other border of paper under and then that it is snug against the within of the first crease (exactly as in the sections to a higher place.)

  5. Advertisement

Add together New Question

  • Question

    What if the paper does not fold properly?

    T. Chinsen

    The best method is to score the paper earlier folding. A tool specific for this purpose is chosen a bone folder. Information technology is available in craft stores in the scrapbooking department. Invest in i if you plan on doing a lot of folding and demand crisp folds. A substitute can be the blunt tip of a butter knife.

Ask a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Advertisement

Video

  • Try to fold rather quickly to ease your mind. You don't usually need to exist perfect. If you focus too hard on getting perfect folds, you may exist more likely to mess up. Just relax and go with it.

  • If you're having problem folding evenly, before you commit to creasing the page, concur the corners being folded on top of the rest of the sheet, simulating the fold without making information technology. Make sure both corners are exactly flush with the edge of the paper.

  • Endeavor not to crease your newspaper too much or it will become harder to get it perfect.

Show More Tips

Thanks for submitting a tip for review!

Ad

  • Ink costs a fortune! If you're making the folds for an important letter, practise on a blank canvas before you endeavor on the concluding product.

Advert

References

Nearly This Article

Commodity Summary X

To fold a newspaper into thirds, effort using the simple cylinder method. Commencement with your paper flat on a surface, then roll it into a loose cylinder. Button down on the cylinder to flatten it out while making certain the edges of the newspaper are equally closely aligned as possible. When it looks similar the edges are equally close to these points every bit you tin go them, push down firmly to fold the paper into thirds. Alternatively, utilise the eyeball method. But fold 1 edge over the acme of the canvas, but don't crease it yet. Line up the edge and so information technology covers half of the paper that remains, then make a pucker. Finally, fold the other edge underneath the piece you lot simply folded then the edge touches the commencement crease you made. For tips on how to fold a piece of paper into thirds using a reference paper, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 569,078 times.

Reader Success Stories

  • Jade Cortez

    "I just had a glow upward, thanks to you!"

Did this article help you?

Source: https://www.wikihow.com/Fold-a-Paper-Into-Thirds

0 Response to "How To Fold A Paper Into 6 Squares"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel